diff --git a/hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-register-when-.patch b/hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-register-when-.patch new file mode 100644 index 0000000..7460614 --- /dev/null +++ b/hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-register-when-.patch @@ -0,0 +1,106 @@ +From f95d0c3bb20d33cfef35378fbfbd61b02544b2d4 Mon Sep 17 00:00:00 2001 +From: Bin Meng +Date: Sat, 8 May 2021 10:47:12 +0800 +Subject: [PATCH] hw/sd: sdhci: Don't write to SDHC_SYSAD register when + transfer is in progress + +Fixes: CVE-2020-17380 +Fixes: CVE-2020-25085 +Fixes: CVE-2021-3409 + +Per "SD Host Controller Standard Specification Version 7.00" +chapter 2.2.1 SDMA System Address Register: + +This register can be accessed only if no transaction is executing +(i.e., after a transaction has stopped). + +With this fix, the following reproducer: + +outl 0xcf8 0x80001010 +outl 0xcfc 0xfbefff00 +outl 0xcf8 0x80001001 +outl 0xcfc 0x06000000 +write 0xfbefff2c 0x1 0x05 +write 0xfbefff0f 0x1 0x37 +write 0xfbefff0a 0x1 0x01 +write 0xfbefff0f 0x1 0x29 +write 0xfbefff0f 0x1 0x02 +write 0xfbefff0f 0x1 0x03 +write 0xfbefff04 0x1 0x01 +write 0xfbefff05 0x1 0x01 +write 0xfbefff07 0x1 0x02 +write 0xfbefff0c 0x1 0x33 +write 0xfbefff0e 0x1 0x20 +write 0xfbefff0f 0x1 0x00 +write 0xfbefff2a 0x1 0x01 +write 0xfbefff0c 0x1 0x00 +write 0xfbefff03 0x1 0x00 +write 0xfbefff05 0x1 0x00 +write 0xfbefff2a 0x1 0x02 +write 0xfbefff0c 0x1 0x32 +write 0xfbefff01 0x1 0x01 +write 0xfbefff02 0x1 0x01 +write 0xfbefff03 0x1 0x01 + +cannot be reproduced with the following QEMU command line: + +$ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \ + -nodefaults -device sdhci-pci,sd-spec-version=3 \ + -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ + -device sd-card,drive=mydrive -qtest stdio + +Cc: qemu-stable@nongnu.org +Fixes: CVE-2020-17380 +Fixes: CVE-2020-25085 +Fixes: CVE-2021-3409 +Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") +Reported-by: Alexander Bulekov +Reported-by: Cornelius Aschermann (Ruhr-University Bochum) +Reported-by: Muhammad Ramdhan +Reported-by: Sergej Schumilo (Ruhr-University Bochum) +Reported-by: Simon Wrner (Ruhr-University Bochum) +Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 +Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 +Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 +Signed-off-by: Bin Meng +Tested-by: Alexander Bulekov + +Signed-off-by: Jiajie Li +--- + hw/sd/sdhci.c | 20 +++++++++++--------- + 1 file changed, 11 insertions(+), 9 deletions(-) + +diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c +index 419782c25d..fdb59f44e6 100644 +--- a/hw/sd/sdhci.c ++++ b/hw/sd/sdhci.c +@@ -1117,15 +1117,17 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) + + switch (offset & ~0x3) { + case SDHC_SYSAD: +- s->sdmasysad = (s->sdmasysad & mask) | value; +- MASKED_WRITE(s->sdmasysad, mask, value); +- /* Writing to last byte of sdmasysad might trigger transfer */ +- if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt && +- s->blksize && SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) { +- if (s->trnmod & SDHC_TRNS_MULTI) { +- sdhci_sdma_transfer_multi_blocks(s); +- } else { +- sdhci_sdma_transfer_single_block(s); ++ if (!TRANSFERRING_DATA(s->prnsts)) { ++ s->sdmasysad = (s->sdmasysad & mask) | value; ++ MASKED_WRITE(s->sdmasysad, mask, value); ++ /* Writing to last byte of sdmasysad might trigger transfer */ ++ if (!(mask & 0xFF000000) && s->blkcnt && s->blksize && ++ SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) { ++ if (s->trnmod & SDHC_TRNS_MULTI) { ++ sdhci_sdma_transfer_multi_blocks(s); ++ } else { ++ sdhci_sdma_transfer_single_block(s); ++ } + } + } + break; +-- +2.27.0 +